I can’t find the answers I’m looking for about finishing my floor.
No worries, we have a dedicated in-house team of experts ready to help. Just fill in our contact form and select the topic that fits best from the dropdown menu, and we’ll get back to you as soon as we can.
What tools should I use to cut high pressure floors with an aluminium locking system?
Use a circular saw blade or laminate blade with tungsten carbide tips. Cut from the decor side first, finishing on the aluminium side (when present). High pressure floors are dense and wear blades quickly, plan to change or sharpen the blade every 60m² of flooring.
How should I clean high pressure floors?
First dust with a soft brush or a vacuum cleaner. The floor can then be cleaned with a soft and damp microfiber cloth or mop. In case of stains a soft microfiber cloth and lukewarm water are recommended. If cleaning agents are added to the water, the BerryAlloc Cleaner Ultra is a phosphate-free and biodegradable cleaning agent that dries without smears and leaves a pleasant fragrance (Note, always use a synthetic detergent, as organic detergents will leave a thin film of grease on the surface resulting in visible footprints when walking on the floor).
Apply the mixture at the recommended dosage on the floor (step by step in small areas) with either a microfiber cloth/mop or a spray bottle. Let it work for 3-4 minutes, depending on type and grade of dirt. Then clean the floor in the lengthwise direction of the planks with a soft microfiber cloth/mop, subsequently rinse the cloth/mop in separate water, and wipe the floor (if required a few times) with clean water.
